ESPARGOS/esp-sdr
ESP-SDR uses the undocumented raw I/Q capture functionality of ESP32 family chips to turn them into (low-duty-cycle) Software Defined Radios
Older snapshot: check the original source for current information.
From the publisher
README & documentation
Source previewRead the project’s overview, installation instructions and usage examples. The original README is the source of truth.
ESP-SDR turns the Wi-Fi/Bluetooth radio of an ordinary ESP32 board into a receive-only software-defined radio. The firmware captures raw I/Q samples from the chip's own receiver and sends them to your computer over USB or UART. No extra SDR hardware is needed. The ESP32's receiver normally feeds its samples straight into the fixed-function Wi-Fi modem. With the help of LLMs, we found an undocumented debug path that lets the CPU read those samples instead. How it works explains the mechanism register by register. Parts of the firmware are AI-generated: we understand the capture mechanism well on the ESP32-C61 used in our ESPARGOS One array, but porting it to the whole ESP32 family by hand would have been too much work. For continuous streaming into Gqrx, GNU Radio and friends, use an ESP32-S31 with SoapyESPSDR, or an ESP32-S3 with esp-sdr-bridge. ✅ supported · 🚧 not yet supported · ❌ not possible…
Read the full README ↗ · Preview checked 2026-11-14T15:37:59.360Z
Inside the original README — Document outline
- ESP-SDR firmware
- Try it yourself: Project overview · Browser SDR viewer · Browser firmware installer
- Quick start
- Supported chips
- What you can do with it
- Talking to the firmware
- Build and flash
- Source layout
- Contributors
- License
Headings are captured from the source. Links open the publisher’s document, not a locally hosted copy.
Links from the README
References supplied by the publisher, not independently verified endorsements. Check the destination before downloading files or entering credentials.
Documentation belongs to its respective authors. Reported project/model license: GPL-3.0. A listing is not a grant of reuse or training rights. Confirm the document’s own terms at the source.
What this repository does
ESP-SDR uses the undocumented raw I/Q capture functionality of ESP32 family chips to turn them into (low-duty-cycle) Software Defined Radios
Repository facts
- Owner
- ESPARGOS
- Primary language
- C
- Stars
- 605
- Forks
- 72
- Open issues + pull requests
- 2
- License
- GPL-3.0
- Archived
- No
- Default branch
- main
- Created
- 2026-09-28T08:50:16.000Z
- Last push
- 2026-10-04T20:02:19.000Z
Topics and intended use
Owner-supplied topics: esp32, sdr
Review the README for scope, installation, examples and limitations. We do not run repository code or certify it.
Evaluate before installing
Review licensing and dependencies, inspect recent commits and unresolved issues, and test in an isolated environment before production use. Stars and forks alone cannot answer these questions.
Source and freshness
Source: GitHub. Metadata observed 2026-10-05T12:05:52.305Z. Daily imports are snapshots, not real-time monitoring.
Popularity and source listings do not establish security, suitability, licensing rights or benchmark performance.